Seat Belt Retractor Substitute Instructions

1 min read

Seat Belt Retractor Substitute Instructions

It’s not unusual for the safety belt to obtain stuck or need to be changed after a mishap. In this article, we review the actions to change a safety belt retractor. Seat Belt Retractor Substitute Instructions.

Changing the safety belt retractor is a simple job that can be finished in a hr. Listed below you’ll find basic instructions on how to change a safety belt retractor.

What you’ll need

Front Seat Belt Substitute

Park the vehicle and set the parking brakes.
If changing the pole positions, relocate completely ahead to subject the B pillar.
Detach the car battery and delay 5 mins before proceeding to the next step.
Remove the weatherstrip about the door frame. remove weather remove to access safety belt
Remove the plastic cut from the vehicle. The cut is, in most situations, is held in position with plastic retainers and should simply stand out off.
Remove the screw at completion of the safety belt.
Detach the cable from the safety belt retractor. safety belt retractor removed
Seat Belt Retractor Substitute Instructions. Remove the safety belt retractor screw. safety belt retractor place

Back safety belt retractor substitute

Park the vehicle and set the parking brakes.
Detach the battery.
Remove the weatherstrip from the back door.Back door weather remove elimination
Depending upon the vehicle, you might need to remove the back seat cushion as well. Back seat removed
Remove the plastic cut from the back pillar. In this situation, you simply draw the cover ahead. If you have actually an SRS tag on this cover, bulge the SRS tag and remove the screw underneath. Back C Pillar Cover
Detach the cables that connect to the retractor. First, you tear out the orange clip after that you can take out the green or yellow connector. Safety belt retractor air bag cable
Remove the screw that protects the safety belt finish to the lower component of the seat. Seat Belt Retractor Substitute Instructions.
Remove the top brace screw. Safety belt brace screw
Remove the screw that protects the retractor to the frame. Raise the retractor and remove it from the vehicle.

That’s The Discussion Seat Belt Retractor Substitute Instructions.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *