How to remove bumper damage with heat weapon

3 min read

How to remove bumper damage with heat weapon

In this tutorial, we’ll show you how to take out a bumper damage. If your bumper has minimal paint damage, you can remove the damage by heating the nicked bumper enough to take out the damage. How to remove bumper damage with heat weapon.

In this DIY tutorial, we’ll use a warm air weapon to heat the bumper. If your bumper has paint damage and scrapes, you can use a customized mixed paint to retouch any scrapes.

How to fix car bumper damage?

Using a warm air weapon, you can quickly warm up a car bumper and take out the damage. Car bumpers are plastic, but yet they are ridgit and can’t be easily curved.

Heating up the bumper with a warm air weapon makes the bumper versatile and allows it to flex easily.

This is the fastest way to fix a bumper damage. The just disadvantage here’s that you need to take note of not thaw the bumper paint or the bumper itself.
What you’ll need

The following devices are required to fix a bumper damage on your own.

Warm Air Weapon
Heat Resistance Handwear covers (Recommended)
Custom Mixed Spray Paint (To fix any scrapes, if any)

Instructions
Loosen up up the bumper clips

How to remove bumper damage with heat weapon. To fix the bumper damage, we first warm up the damage. Most significantly, you’ll need to obtain your hand behind the damage. That is why it’s important to loosen up up the bumper.

Car bumpers are held up by 10 mm screws and plastic clips. If the damage gets on the corner, you might have the ability to place your hand behind the damage by getting to from underneath. In our situation, we removed 2 10 mm screws, and the bumper came loosened on one side.

Before you also move on step 2, try pressing on the bumper with your hand without also heating up the bumper.

Depending upon the seriousness of the damage and how versatile your bumper is, the damage might come right out. If your bumper is thick, the damage may not come out, and you need to proceed to the next step.

If you have actually car ramps, roll the car on the ramps. It will be a great deal easier to deal with the bumper if the vehicle is increased a couple of inches.

Warm up the nicked location in your bumper.

In our situation, we are using a warm air weapon. Set the warm air weapon at 650 levels Fahrenheit. Maintain the warm air weapon 8 inches far from the bumper. How to remove bumper damage with heat weapon.

Pay shut focus on the paint. Do not maintain the heat weapon to shut, or you’ll thaw the paint.

Depending upon if you’re using a warm weapon, hairdryer, or warm water, you’ll need to warm up the bumper for about 5 to 15 mins.

If you’re using a hairdryer, set it to the maximum warm setting.

Move your hand over the damage in a round motion. Do not maintain your practical a solitary spot.

Maintain heating the bumper. Pay shut focus on the paint color. You do not need to warm up the bumper to the point that the paint begins to thaw.

Obtain damage from the bumper.

Currently it’s time to obtain the damage from the bumper. Use handwear covers, and with the hand of your hand, press out the damage.

If you heated up the bumper, the damage would certainly easily come out. If you didn’t, you would certainly need to use force to press the damage out.

We prefer to use a wood obstruct to bulge the damage by pressing from behind the bumper. A wood obstruct can avoid damage that you might or else cause for your hands or the bumper.

Beware and do not press with an item that has sharp edges. This can cause a fold or a increased spot on the bumper.
Use a steel plate to lower any high bumper spots.

You’ll have the ability to press the bumper damage out, but you might notice that there may be a couple of high spots on the bumper.

How to remove bumper damage with heat weapon. To fix these, warm up the spot and use a steel plate to continue the damage. You can proceed to continue the high spot and strike warm air to the location to fix any high spots.

Use paint scratch cleaner to clean damage.

Currently it’s time to clean the location. Very often, the paint that you see on your bumper may be from the various other car or the item that you hit.

These can be easily removed. Do not simply use warm water, however, as it will not work.

Use a Paint Scratch Cleaner Set for the very best outcomes, or additionally, you can use acetone.

Use coordinating paint to fix any scrapes.

If your bumper was seriously hit and there’s paint damage, you can use a coordinating spray paint blend to fix these scrapes.

You can most likely to your dealer, and they’ll sell you a tiny container of touch-up paint. Or the better option is to buy a huge can of Custom Mixed Car Spray Paint.

There are several body stores throughout the Unified Specifies that will blend you a can of paint for your car and mail it to you.

You’ll need to provide the paint code for your car, which usually is found on the same sticker label that has your VIN number or simply provide the VIN number, and they can often find out the color of your car. How to remove bumper damage with heat weapon.

Leave a Reply

Your email address will not be published. Required fields are marked *